Office of Public Relations

Microbes and the Future of Fuel Production

Jeff Watkins | News Center | July 23, 2013


Dr. Hal MayHal May, Ph.D. is an environmental microbiologist working on current fuel production. 


Hal May needs a microscope to see his workmates, but wonders if eventually it will take an environment as large as an ocean to reach their potential.

In his lab at the Hollings Marine Laboratory at Fort Johnson on Charleston Harbor, May and his staff have found methods to induce microbes to produce various chemicals and fuels that eventually could have commercial value, and do it at minimal cost in a relatively new process called microbial electrosynthesis. With this process, electricity is used as an energy source to feed microbes and stimulate them into producing a variety of organic compounds.

We've gotten a long way on fossil-based systems, but in the long run, there are these issues with carbon released into the atmosphree, as well as someday, you will run out (of fossil fuels).

Hal May, Ph.D.

“You take electricity, carbon dioxide, water, and microbes, and you say ‘make something’ which also means they have to make a living out of this,” he says. “The electricity is their energy source. We all have to have an energy source –theirs is electricity. We all have to have a carbon source – their carbon source is carbon dioxide.”

May, an environmental microbiologist with a Ph.D. from Virginia Tech, initially succeeded in getting microbes to generate electrical current, but eventually concentrated on feeding electricity to microbes to make other products.

This project came in response to an initiative from the U.S. Department of Energy’s Advanced Research Projects Agency (ARPA), seeking innovative shortcuts to make chemicals and fuels from carbon dioxide. “’We don’t want to use fossil fuels and we don’t want to use photosynthesis. We just want to make it straight up from carbon dioxide,’” May recalls the DOE’s directive, “which was a bit of a tall order.”

“So I proposed (that) you could put an electrode in (with microbes) and that could be the energy source for these things.  The reason I proposed that was because I knew the reverse was true. We can make electricity in an electrode with microbes, but can we get
microbes to consume electricity in an electrode, just turn the process  around. That was the basis of my hypothesis,” May explains.

Microbes can be found practically everywhere – in the air, ground, water and in living creatures, and they can thrive in dramatically different environments. May and his research assistants made an extensive search looking for the right microbes, and found the best candidates in a cistern behind a local beer brewery.

“Of all the different sources we’ve been using, that’s the one that worked,” May says. “Different stages of fermentation and different types of fermentation. In the end, all of that gets washed out of the tanks and goes into a cistern at the back of the building as a pretreatment before they can release it legally into the Charleston wastewater system. You would expect most of what is in there: a bunch of yeast, leftover sugars, alcohol, vitamins, a few other intermediate fermentation items. That all goes back in the cistern and becomes an even  bigger, nastier brew.

Microbes
Sarah Pack
May's microbes, with a little electric current, can produce a variety of compunds, including hydrogen, acetic acid and methane.                                                  

“It’s not sterile, of course.  They don’t want it to be sterile.  They want it to consume as much waste as possible before it goes into the wastewater treatment system.  From a microbiology standpoint, that’s
wonderful.  That means you have a very happy, active population of microorganisms that you feed every day, and they’ve been feeding them for years. So that means you’ve got them well adapted to do whatever crazy things they’re doing in there.”

On a rainy day, May and his research assistants collected a batch of the brewery’s tiny inhabitants and brought them back to his lab. Fortunately, for May anyway, they had traveled in separate vehicles to the brewery, and he chose to let the students bring the microbes back with them, “because you don’t want to smell your car for a week after that stuff’s been in there.”

From there, it was a matter of configuring the microbes to become proficient at their task by adjusting the amount of voltage to use, proper temperature and pH, and how much carbon dioxide to give them, among other factors.

Eventually, May and his staff begin to observe the brewery microbes drawing noticeable amounts of electric current. “That told us something was off to the races,” he says.

Microbes, it turns out, are capable of producing a variety of organic compounds. “It’s how we discovered antibiotics, microbes producing antibiotics and antibiotics are pretty complex molecules,” May explains. “The microbial world has a tremendous capability to make lots of different compounds, from anything to plastic precursors to fuels to drugs.”

“What May’s microbes have primarily produced so far are hydrogen, acetic acid and methane. Potentially, several other compounds could be produced, many of them with commercial applications, although May says that stage is a long way off. “If we can produce hydrogen acetate, theoretically you could then make ethanol from that. If you can make hydrogen and butyrate, theoretically you could make butanol. Each of those could be a fuel. You could even convert some products into bioplastics,” he says.

Acetic acid, for example, already has a huge market in the production of polymers, paints and plastics. The same goes for hydrogen, which can be used as a fuel or as an ingredient in other products.

Then there is the sustainability factor. May’s lab uses nothing more than electric current and carbon dioxide to get results. Nothing else, at least at this stage, is needed, making it extremely cost-effective. In fact, based on a hypothetical rate of five cents per kilowatt-hour, May’s lab can produce 60 cents worth of acetic acid with only 35 cents of electricity.

‘We’ve gotten a long way on fossil-based systems, but in the long run, there are these issues with carbon released into the atmosphere,” May says about current production methods, “as well as someday, you will run out (of fossil fuels).“

The challenge, of course, is to produce a high enough volume of these compounds to make them commercially viable. May has broached that subject with some engineering firms to explore the possibility. Eventually, the solution may be only a short distance from his Fort Johnson location – the Atlantic Ocean.

“The ocean is gargantuan and captures CO2 more so than fresh water,” he explains. “If you could build a reactor and use marine water, you could use the CO2 from the ocean and convert it into a useful chemical. I want to see if we can leverage the ocean for this.”

May is also interested in the ocean for other reasons. “The diversity of organisms in the ocean is so vast, we may find another microbe out there that will do this very well or make a different chemical. I want to go look.”


This story is part of MUSC's Annual Report 2011-2012: The Greening of MUSC. To see the full version, visit this site.
 


  Annual Report

Annual Report
Annual Report 2011-2012


Related Stories >>

Electrosynthesis of Commodity Chemicals by an Autotrophic Microbial Community

Long-term Operation of Microbial Electrosynthesis Systems Improves Acetate Production by Autotrophic Microbiomes

The environment and lupus: Is there a connection?


Resources >>

Marine Biomedicine and Environmental Sciences

Department of Microbiology and Immunology


Dr. Harold May, MUSC Professor Microbiology & Immunology - Video

 
 
 

© 2014  Medical University of South Carolina | Disclaimer